Maroz Store — An online shop for frozen-storage | marozstore.com

Maroz Store — An online shop for frozen-storage | marozstore.com

Freezer Energy Use and Installation

A 200-litre chest freezer commonly uses 100-200 kWh a year; a frost-free upright of the same size uses roughly 10-30% more.

The running-cost baseline: a 200-litre chest freezer commonly consumes 100-200 kWh a year. A frost-free upright of the same size uses roughly 10-30% more, the price of never defrosting by hand.

Comparisons between models rest on the EU energy label, rescaled in 2021 from the old A+++ scale to classes A-G. Whatever the letter, the label must state annual consumption in kWh — the single most comparable number on the sheet.

Siting decides whether the label figure holds. Freestanding units need 5-10 cm of clearance around them; built-in appliances are 82-87 cm tall against a standard 90 cm worktop, and kitchen base cabinets come 60 cm wide.

The signature mark of this site, drawn as a plate

On narrow screens, swipe or scroll the plate sideways.

Delivery imposes a wait before the first switch-on: 4 hours of standing time after transport on the unit's side, and 24 hours if it was carried horizontally. The wait protects the compressor; skipping it is the most common first-day mistake.

Maintenance is a single threshold. When frost on the walls reaches 5-10 mm it insulates the evaporator and pushes energy use upward, so that layer — not the calendar — is the defrost signal.

The numbers on this page complete the buying check started in the size guide and the star-rating guide: litres for the household, stars for the job, kWh and clearance for the kitchen.

  • Read annual kWh on the A-G label before comparing anything else.
  • Leave 5-10 cm of air around a freestanding unit.
  • Wait 4 hours after side transport, 24 hours after horizontal transport.
  • Defrost at 5-10 mm of frost to keep consumption at the label figure.

Further reading